Installation guide

Updating the IMPAX Server log file locations
Ensure that you have noted or referenced which IMPAX services are to be modified.
To update the IMPAX log file locations
1. Select Start > Administrative Tools > Services.
2. For each service to be updated:
a. Right-click the service and select Properties.
b. Under Service status, click Stop.
c. In the Start parameters field, type:
-f <full path of log file>
For example, -f g:\log\mitra.log.
d. To restart the service, under Service status, click Start.
e. To exit the Properties dialog, click OK.
Note:
You must start the service before exiting the Properties dialog; otherwise, your changes are not saved.
Updating logging for the Administration Tools server
A separate procedure is performed for the server running the IMPAX Administration Tools.
To update logging for the Administration Tools server
1. Using a text editor, in C:\mvf\java\etc\jclient.properties, search for the following text and modify
the path:
logDirectory
logFile
2. Using a text editor, in C:\mvf\java\etc\jserver.properties, search for the following text and modify
the path:
mtk.logFile
jmtk.logFile
Note:
Use the forward slash (/) in the path names.
3. To resume services, restart the Administration Tools server.
IMPAX 6.3 AS300 Configuration Guide 17