Installation guide

• When creating a cache on a Windows system, do not use a trailing slash or backslash at the end
of the volume path. For example, when creating an image cache, do not type
\\server\f$\CACHE1\; instead, use \\server\f$\CACHE1. Defining the cache volume with a
trailing slash or backslash can cause problems in retrieving images from the cache.
• If Curator and Network Gateway components are installed on the same server, all caches on the
system (image and web) must be shared. Shared caches are specified without the volume letter;
for example, instead of \\server\f$\CACHE1, use \\server\CACHE1.
Note:
If cache volumes are assigned to a subdirectory on a partitioned hard drive, the values shown in the
Available and Occupied columns in Cache Manager refer to the entire partition, not the subdirectory.
Configuring archives on a single-host server
The archive component of the single-host server requires some configuration. Refer to the topic
applicable to the type of archiving being used.
Applicable topicArchive type
Configuring PACS Store and Remember archiving (refer to page 22)PACS Store and Remember
Configuring an HSM archive (refer to page 28)HSM
Moving the VOLUMES partition for DVD archives (refer to page 28)DVD-R
If using the Scavenger service, also refer to Configuring Scavenger (refer to page 29).
Logging out of the Administration Tools
Log out of the Administration Tools when you leave the station for any length of time. Logging out
protects patient confidentiality, and maintains system security.
To log out of the Administration Tools
1. In the top-right corner of the Administration Tools, click Exit.
2. To close the Administration Tools window, click Exit.
When you log out, IMPAX continues to function in the background.
IMPAX 6.3 AS300 Configuration Guide 15