Installation guide

13. To exit the setup dialog, click OK.
14. Close the ODBC Data Source Administrator dialog.
Logging into the Administration Tools
Many IMPAX Server configuration tasks must be performed in the Administration Tools. This topic
explains how to log into the Administration Tools. A valid user ID and password are required.
Note:
Passwords are case-sensitive; PASSWORD is not the same as password .
To launch the Administration Tools locally
1. Select Start > All Programs > MVF Administration Tools > Administration Tools.
2. From the Domain list, select the correct domain.
3. In the User ID field, type the user ID assigned to you.
4. In the Password field, type your password.
5. Press Enter or click Login.
To launch the Administration Tools remotely
1. Select Start > All Programs > Internet Explorer.
or
Double-click the Internet Explorer desktop shortcut.
2. In the Address field, type the URL or IP address of the server.
The Administration Tools launch in a new browser window.
3. From the Domain list, select the correct domain.
4. In the User ID field, type the user ID assigned to you.
5. In the Password field, type your password.
6. Press Enter or click Login.
Tip:
After you log in under your user ID for the first time, your user ID may appear as a button on the login
screen. This can be configured by your system administrator. If your user ID appears as a button, you
can click your User ID and type your password to log in.
IMPAX 6.3 AS300 Configuration Guide 12