Specifications

TREK‐510Usermanual18
2.2 InstallationProcedur es

2.2.1  ConnectingthePowerCord 
Connectthe  threepinwaterproofpower cord tothe DC  inlet  of  theIn‐VehicleComputing
Box. On the
 open‐wire end, one pin is reserved for positive voltage and is ma rked,  "+";
one pin is
 reserved  for ground  and  is  marked,  "‐"; and, one pin is reserved for the
ignitionsignalwithan“ignition”mark.


Note!  Ignition  on/off  setting:TheTREK ‐510supportsanignit ionon/off 
functionsothatyoucanpoweron/offtheTREK‐510viatheignition
signal/voltageandconnecttheTREK‐510vehicleignitionswitch.


Ta b l e 2.2.1PinDefinitionofPowerCord

Pin  Definition  Color 

1  +  Red 
3  ‐  Black 
4  Ignition  Orange 


2.2.2  PowerConnector

 
Figure2.6.Powerconnectoroutlook 

Table2.2.2PindefinitionofPowerConnector(Mo lexManufacturerpartno.0430451200)
Pin  Signal  Pin  Signal 
1 ChassisGround 2 Ground
3 Ground 4 (Reserved)
5
(Reserved) 6 (Reserved)
7
PowerInput(6~36VDC) 8 PowerInput(6~36VDC)
9
AccIgnitionInput 10 Ground
11
(Reserved) 12 PowerbuttonInput

Connector:Molex430451200
Matingconnector:Molex0430251200
