Assembly Instructions

DSRFID reader photo And Location.docConfidential Page 1 of 3 12/04/2019

Medical Imaging RDE

From: Jan Vercammen (6233) – R&D Mortsel/Electronics

Date: March 21, 2019

Concerning: DSRFID tag reader photo (FCC ID: HPL-DSRFID)

The RFID tag reader is a small printed circuit board, it is a drop-in for other RFID tag readers

(1) DSRFID PCB top assembly

(2) DSRFID PCB bottom

PAGE 1
ab Medical Imaging RDE From: Jan Vercammen (6233) – R&D Mortsel/Electronics Date: March 21, 2019 Concerning: DSRFID tag reader photo (FCC ID: HPL-DSRFID) The RFID tag reader is a small printed circuit board, it is a drop-in for other RFID tag readers (1) DSRFID PCB top assembly (2) DSRFID PCB bottom DSRFID reader photo And Location.
PAGE 2
ab Medical Imaging RDE (3) The RFID reader is assembled into plastic covers The RFID reader is used in production Drystar table top printer models 5366 and 5367, in production Drystar floor standing printer model 5364. The RFID reader can be used as a spare part in Drystar table top printer models 5365, 5366 and 5367, in production Drystar floor standing printer model 5364. In this case an extra label will used to indicate the presence of this RF part.
PAGE 3
ab Medical Imaging RDE (4) Printer front side, left closed tray, right open tray (5) Bottom view of open tray, white arrow shows RFID reader in its plastic covers. END of Document DSRFID reader photo And Location.