DC-630 User manual Downloaded from ManualsCamera.
Thank you for purchasing this DC-630 digital camera. Please read these operating instructions carefully in order to use the product correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Disclaimer We assume no responsibility over and above the provisions of the Product Liability Law for damages suffered by the user or third parties as a result of inappropriate handling of the product or its accessories, or by their operational failure and by their use.
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
FCC Compliance and Advisory This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) this device may not cause harmful interference, and 2.) this device must accept any interference received, including interference that may cause unsatisfactory operation. This equipment has been tested and found to comply with the limits for a Class B peripheral, pursuant to Part 15 of the FCC Rules.
Safety Information Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. Do not aim the camera directly into the sun or other intense light sources which could damage your eyesight. Do not try to open the case of the camera or attempt to modify this camera in any way. High-voltage internal components create the risk of electric shock when exposed.
Table of Contents SAFETY INFORMATION............................................................................................................................................ 4 TABLE OF CONTENTS................................................................................................................................................. 5 GETTING STARTED..................................................................................................................................................
Using the Scene Mode ................................................................................................................................ 26 Setting the Resolution and Quality ............................................................................................................. 27 Setting the Movie Size ................................................................................................................................ 27 Setting the White Balance ..............................
FORMATTING THE MEMORY....................................................................................................................................... 42 RESETTING TO DEFAULT SETTINGS ............................................................................................................................ 43 MAKING CONNECTIONS ........................................................................................................................................ 43 CONNECTING THE CAMERA TO A TV .....
Getting Started Standard Accessories Camera USB cable Video out cable Soft case Strap 2 x AA batteries Software Installation CD-ROM User’s manual -8Downloaded from ManualsCamera.
Attaching the Wrist Strap Attach the wrist strap to your camera as shown. NOTE: Do not swing the camera when carrying by the wrist strap. Using the Soft Case When not using the digital camera, keep it in the soft case for protection. -9Downloaded from ManualsCamera.
Names of Parts Top Front Bottom - 10 Downloaded from ManualsCamera.
Back Side 5-function button - 11 Downloaded from ManualsCamera.
Inserting the Batteries The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 1600 mAh / 1.2V) batteries. 1. Slide the battery cover open. 2. Insert two AA-size alkaline batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room. 3. Slide the battery cover closed. Low Battery Indicator A low battery indicator appears on the LCD screen when the batteries are nearly exhausted.
Inserting a Memory Card You can use SD Card or MMC Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment. 1. Be sure that the camera is turned off. 2. Slide the battery cover and open it. 3. Insert the card with the label facing up and the arrow pointing in. 4. Close the battery cover. To remove the memory card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.
Setting the Date and Time When the camera is first turned on, the date and time setting will not be correct. So before using, be sure to set date and time. 1. Press the MENU button, using SETUP ( 2. Press press or to select ) and press the SET button. or to select DATE & TIME ( ) then or the SET button to launch the Date & Time screen. 3. Press or to change the value of the highlighted field. Press or to highlight another field. 4.
Basic Operations Turning the Power On and Off 1. Press the POWER button to turn on the camera in the Record mode. Or you can press the button to turn on the camera in the Playback mode. 2. Press the POWER button again to turn the power off. Hint: You can turn on the camera without the start-up and operating sound by pressing and holding the POWER or the button over 1.5 seconds. Power Saving Function If the camera is turned off by Power Save feature, press the POWER or the turn it on again.
Switching between Record and Playback You can switch between the Record mode and the Playback mode in following ways: In Record mode Press the MODE button to cycle through the still image shooting, voice recording, and movie recording. Press the mode. button to switch to the Playback NOTE: If you switch to Playback mode, the lens will retract after approximately 10 seconds. In Playback mode Press the MODE or the button switch to the previous used Record mode. - 16 Downloaded from ManualsCamera.
Using the Menus Recording Menu / Playback Menu When a menu screen is displayed, the arrow button and the SET button are used to make the desired settings. 1. Press the MENU button to display the menu. The menu displays depends on whether you are in the Record mode or the Playback mode. 2. Press or to select a menu item. 3. Press or to change the setting. In playback menu, press or to select an option, and then press the SET button to display a confirmation screen or apply the setting. 4.
Using the LCD monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. LCD Screen Indicator In Recording 1 Mode icon 11 Shutter speed 2 Flash 12 Aperture value 3 Macro 13 Metering 4 Self-timer / Burst 14 Exposure 5 Zoom indicator 15 ISO 6 Battery 16 White balance 7 Storage media 17 Sharpness 8 Focus area 18 Quality 9 Shake warning 19 Resolution 10 Shots remaining - 18 Downloaded from ManualsCamera.
In Playback 1 Mode icon 6 Storage media 2 Protect 7 Capture date & time 3 Voice memo 8 DPOF 4 File number / Total 9 Resolution 5 Battery Switching the Screen Display Press the DISP button changes the next display mode of the LCD monitor as shown below: In Record mode In Playback mode (1) OSD on (4) OSD on (2) Guide line (5) OSD off (3) OSD off Hint: Use the “Guide line” mode to compose images easily before shooting images.
Recording Recording Still Images 1. Hold the camera with both hands and make sure the camera is stable. 2. Set the camera to the Record mode 3. Aim the focus area to the subject that you want to take and press the shutter release button halfway. The focus area on the LCD monitor will light green when the camera is in focus. If the shutter speed is slow or the possibility that image may be blurred, the shake warning icon may appear on the LCD monitor.
Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allow you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process. Press [W] to zoom out for a wide-angle shot. Press [T] to zoom in for a telephoto shot. When the zoom lever is pressed, the zoom bar ap pears on the LCD monitor.
Using the Flash Press the flash button cycles your camera through the various flash modes. A symbol appears On the LCD screen to indicate the flash mode. The flash cannot be used when movie recording. 1. Set the camera to the Record mode The flash function only used in still image shooting. 2. Press the Display button to change the flash mode: Option Description Auto flash Flash fires automatically when shooting conditions require extra lighting.
Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record four continuous still images shooting. 1. Set the camera to the Record mode This function only used in still image shooting. button to change the 2. Press the settings: Display Option - Single shot Description Record a single image. 2-SEC The shutter release will be delay for 2 seconds.
Using the Macro mode Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 5 cm from the lens when in the maximum wide angle (zoomed out) setting and 25 cm in the maximum telephoto (zoomed in) setting. 1. Set the camera to the Record mode You can use the macro mode in still image shooting or movie recording. 2. Press the button to enter the macro mode. The macro mode icon ( monitor. ) appears on the LCD 3.
Recording Movie Clips Your camera can record movie clips with audio. 1. Set the camera to the Record mode The LCD monitor displays the available recording time. 2. Press the shutter to start recording. 3. Press the shutter again to end recording. The camera will stop recording automatically when the memory capacity has been reached. NOTE: The voices of the movie clips are recorded from the microphone of the camera. Be careful to avoid touching the microphone while recording.
Setting the Recording Functions Using the Scene Mode You can select from various scene mode for specific shooting conditions. 1. Set the camera to the Record mode The scene mode function only used in still image shooting. 2. Press the button to show the Scene Mode screen. 3. Use the arrow button to select a desired scene mode and press the SET button to confirm the setting. Display Option Description Program All settings can be changed in this mode.
Setting the Resolution and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. Resolution Option Description 3264x2448 - Suitable for printing large size paper. 2816x2112 - Suitable for printing normal size paper. 2784x1856 - Printing in 3:2 ratio. 2304x1728 - Suitable for printing on A4 paper. 1600x1200 - Suitable for printing on A5 paper.
Setting the White Balance Adjust the white balance to match different light sources such as sunlight, incandescent (tungsten) lighting or, fluorescent lighting. Option Description Automatically corrects white balance. Ideal for general photography. Adjusts for bright sun conditions, or natural light conditions. Adjusts for cloudy days or twilight conditions Adjusts for normal indoor lighting conditions. Corrects the orange hue of household light bulbs.
NOTE: Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible. Setting the Exposure Set the exposure value manually to compensate for unusual lighting conditions such as indirect indoor lighting, dark backgrounds, and strong backlighting. Setting the Metering There are 3 different light metering options available on your camera. Option Description Light is measured from the entire shooting screen, but gives more importance to the values near the center.
Setting the Photo Effect You can add special effects to your images in Record mode or in Playback mode. Option Description Off No effect is added to the image. B&W Convert image to black & white. Sepia Recorded image will be stored in a sepia tone. Neg. Art Opposite what they were in the original image. Mosaic Add mosaic tiles to the images. NOTE: The mosaic effect only can be set in playback mode.
Playback Playing Back Images 1. Set the camera to the Playback mode 2. Press to play back the previous image; press to play back the next image. Hint: Holding down or in a high speed. scrolls images Using the Thumbnail When in Playback mode, you can view all your stored images in thumbnail format. 1. Set the camera to the Playback mode 2. Press the zoom lever [W], a thumbnail screen is displayed. 3.
Playing Back Movie Clips 1. Set the camera to the Playback mode 2. Press or to select the movie clip that you want to playback. 3. Press the SET button to start the movie. The movie clip will play on the LCD monitor. 4. Press the MENU button to stop the movie, or press the SET button to pause the movie. When movie clip paused, press the SET button again to resume. Hint: During movie playing back, press to fast forward or press to rewind it.
Playing Back Sounds 1. 2. 3. 4. Set the camera to the Playback mode Press or to select the audio clip that you want to playback. Press the SET button to start playing the audio clip. Press the MENU button to stop the audio clip, or press the SET button to pause it. When audio clip paused, press the SET button again to resume. Recording a Voice Memo You can add a voice memo to the still images after you record it. 1. Set the camera to the Playback mode 2.
4. Press the MENU button to stop the voice memo, or press the SET button to pause it. When voice memo paused, press the SET button again to resume. Deleting Files Deleting a Single File Single image can be deleted using the Playback Menu or pressing the camera button ( 1. Set the camera to the Playback mode Press the MENU button, then press select DELETE ( or to ). 2. Press or to select SINGLE, and then press the SET button. 3. Press or to select the image you want to delete. 4.
Protecting Files Files stored on your camera or on a memory card can be protected to prevent accidental deletion. 1. 2. 3. 4. 5. Set the camera to the Playback mode Press the MENU button, then press or to ). select PROTECT ( Press or to select SINGLE, and then press the SET button. Press or to select the file you want to protect. Press the SET button to protect the file or press the MENU button to cancel. When the file is locked, the displays on the LCD monitor. Repeat step 4~5 to protect images.
Editing Images Rotating Still Images The still images can be rotated by various degrees. 1. 2. 3. Set the camera to the Playback mode Press or to select the image you want to rotate. Press the MENU button, then press or to select ROTATE ( 4. 5. ). Press or to select an option, and then press the SET button. Press the SET button to confirm the change or press the MENU button to cancel. The rotated image will be saved as a new file name.
Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. 1. 2. Set the camera to the Playback mode Press the MENU button, using or select DPOF ( 3. 4. 5. 6. 7. 8. 9. to ) and press the SET button.
Playing a Slide Show You can set the camera to display images in a slide show. 1. 2. Set the camera to the Playback mode Press the MENU button, using or ) and press the SET button. SHOW ( 3. 4. to select SLIDE Use the arrow button to set the playback interval ( ) and repeat or not ( ). You can set the interval between 1~10 seconds. Press the SET button to start the slideshow, or press the MENU button to cancel.
Setup Settings Adjusting Sounds You can adjust the sound volume and set different sounds as the start-up sound. 1. Set the camera to the Setup Menu or 2. Press then press to select SOUNDS ( ) and or the SET button to enter the sounds screen. 3. Use the arrow button to adjust the volume and select a desired start-up sound. 4. Press the SET or the MENU button to apply the setting. 5. Press the MENU button to close the menu.
Setting the Language The camera can display menus and other information in a number of different languages. 1. Set the camera to the Setup Menu 2. Press or to select LANGUAGE ( ) then press or the SET button to launch the submenu. 3. Press or to select a language and press or the SET button to apply the setting. 4. Press the MENU button to close the menu.
File Naming File name begins with “DSCI” and are followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the warning message “Folder cannot be created”. When it appears, try one of the following ways: Reset the file number and plug in a new memory card. The folder number and file number are initialized and renumbered from 100 and 0001 respectively.
Choosing a Startup Image You can choose a recorded image as the start-up image. 1. 2. 3. Set the camera to the Playback mode Press or to select a desired image. Press the MENU button, then press or select S.IMAGE ( 4. to ). Press 5. or to select an option, and then press the SET button. Set the camera to the Setup Menu 6. Press or to select S.IMAGE ( ) then press 7. 8. or the SET button. Press or to select a desired image and press the SET or the MENU button to apply the setting.
Resetting to Default Settings You can reset the entire menu and button operation settings to initial default. 1. Set the camera to the Setup Menu 2. Press or the submenu. 3. Press or to select RESET ALL ( ) then press or the SET button to launch to select YES then press the SET button to reset all settings.
Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: by inserting the memory card into a card reader by connecting the camera to a computer using the included USB cable Using the Card Reader 1. Eject the memory from the camera and insert it in a card reader that is connected to a computer. 2. Open My Computer or Windows Explorer and double-click the removable drive icon that represents the memory card. 3.
NOTE: You don’t have to turn off the computer or camera when making this connection. Refer to your computer’s manual for information regarding the USB port location. The camera will turn off automatically if the USB cable is disconnected. Windows 98/98SE: If this is the first time the camera has been connected to the computer, Windows detects the camera as an “Unknown device” and automatically completes the required software installation.
Installing the Software The bundled software CD has the drivers and software that come with camera. Insert the CD into your CD-ROM drive. The autorun menu appears: The following software is listed: Install Ulead Photo Explorer 8 SE Basic Installs software for organizing and keeping track of you media. Install VideoStudio 7 SE VCD Installs software for editing captured movies.
Installing the Software Driver Windows 98 (Second Edition) requires the installation if the driver to use the camera as a mass storage device. 1. Install the included software installation CD-Rom in you computer’s CD-ROM drive. The autorun menu appears. 2. Click Drivers. You are prompted to choose a setup language. Choose a setup language and click OK. 3. Follow the on-screen instructions to install the drivers.
Using the Software Ulead Photo Explorer 8 SE Basic Ulead Photo Explorer 8.0 SE Basic is a versatile tool for owners of digital cameras. Webcams, DV camcorders, scanners, or anyone who strives to handle digital media effectively, Photo Explorer provides an efficient way to transfer, browse, modify and distribute digital media. Ulead Photo Explorer 8.
Appendix Troubleshooting Problem Power does not turn on. Cause Solution Battery is inserted in the Reload battery in the correct wrong direction. direction. Batteries are dead. Replace or recharge batteries. The battery compartment Make sure the battery compartment door is open. door is securely closed. The camera does not take The flash is charging. Wait for the flash to charge. pictures. Memory is full. Insert a new memory card.
Specifications Sensor 6.0 megapixel CCD Size : 1/2.5 inch Lens Focal length : f=5.95 ~17.14mm , 3X optical zoom, 4X digital zoom LCD monitor 2.4” TFT color LCD Focus range Normal: 80cm ~ Infinity Macro: (W) 5cm ~ 1m / (T) 50cm ~1m Aperture F/2.8 ~ 4.8 Shutter 8 ~ 1/2000 sec. File Format Still Image: JPEG (EXIF 2.
Customer care More information to the complete product range can be found under: www.plawa.com Service & Repair Hotline (Europe): 00800 75292100 Service & Support Hotline (Germany): 0900 1000 042 (1.49 Euro/ min. Deutsche Telekom) Online Service: support-apdc@plawa.com Manufactured by plawa-feinwerktechnik GmbH & Co. KG plawa-feinwerktechnik GmbH & Co. KG Bleichereistr. 18 73066 Uhingen Germany - 51 Downloaded from ManualsCamera.
