DC-530i User manual Downloaded From camera-usermanual.
Thank you for purchasing this DC-530i digital camera. Please read these operating instructions carefully in order to use the product correctly. Keep the instructions in a safe place after reading so that you can refer to them later. Disclaimer We assume no responsibility over and above the provisions of the Product Liability Law for damages suffered by the user or third parties as a result of inappropriate handling of the product or its accessories, or by their operational failure and by their use.
any way. High-voltage internal components create the risk of electric shock when exposed. Maintenance and repairs should be carried out only by authorized service providers. y Do not fire the flash too close to the eyes of animals or people, especially for young children. Eye damage may result. In particular, remain at least one meter away from infants when using flash. y Keep the camera away from water and other liquids. Do not use the camera with wet hands. Never use the camera in the rain or snow.
Contents SETTING THE RESOLUTION AND QUALITY 21 GETTING STARTED 1 RECORDING MOVIE CLIPS 22 SETTING THE MOVIE SIZE 22 USING THE ZOOM FUNCTION 23 USING THIS MENU 1 USING THE FLASH 24 SCOPE OF DELIVERY 2 USING THE MACRO 25 ATTACHING THE WRIST STRAP 2 USING THE SELF-TIMER & BURST 26 PARTS OF THE CAMERA 3 INSERTING THE BATTERIES 5 RECORDING AND PLAYING VOICES 27 LOW BATTERY INDICATOR 5 ABOUT BATTERY TYPE 5 RECORDING AUDIO CLIPS 27 INSERTING THE MEMORY CARD 6 PLAYING BACK AUDIO CL
PROTECTING A SINGLE FILE 37 SOFTWARE INSTALLATION 45 PROTECTING ALL FILES 37 PROTECTING MULTIPLE FILES 38 SYSTEM REQUIREMENTS 45 EDITING IMAGES 39 INSTALLING THE SOFTWARE 46 ROTATING STILL IMAGES 39 INSTALLING THE SOFTWARE DRIVER 47 CHANGING THE IMAGE SIZE 39 INSTALLING ULEAD PHOTO EXPLORER 8 SE CHANGING THE IMAGE WITH EFFECTS 40 BASIC 47 COPYING THE FILES 40 INSTALLING VIDEOSTUDIO 7 SE VCD 48 SETTING THE DPOF 41 USING THE SOFTWARE 48 CHOOSING A STARTUP IMAGE 42 APPENDIX 4
Getting Started Using This Menu Quick Start This is the overview about take pictures and play back images with this camera. For detail operation, please refer to the corresponding pages. Getting Started This section contains information you should know before using this camera. Basic Operations This section explains all recording features of this camera. Recording This section explains how to record still images, movies, and audio files.
Scope of delivery Camera USB cable AV cable Soft case Strap 2 x AA batteries Software installation CD-ROM User’s manual Attaching the Wrist Strap Attach the wrist strap to your camera as shown. Caution y Do not swing the camera around by the strap. Downloaded From camera-usermanual.
Parts of the Camera 1. Self-timer Lamp 2. Flash 3. Loudspeaker 4. Lens 5. LCD Monitor 6. Operation Lamp 7. Zoom Button See also: y Thumbnail y Playback Zoom 8. Playback Button 9. Menu Button 10. Mode Button 11. Delete Button 12. Flash Button 13. SET/DISP Button 14. Macro Button 3 Downloaded From camera-usermanual.
15. Strap Ring 16. Shutter Button 17. Power Button 18. Microphone 19. USB/ AV Terminal 20. Tripod Socket 21. Battery Cover / Memory card slot Downloaded From camera-usermanual.
Inserting the Batteries The camera is powered by two AA-size alkaline batteries or rechargeable NiMH (min. 1600 mAh / 1.2V) batteries. 1 Open the battery cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the batteries. y Insert two AA-size batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room. 3 Close the battery cover.
Inserting the Memory Card You can use SD Card or MMC Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment. 1 Open the battery cover. y Slide the battery cover in the direction indicated by the arrow. 2 Insert the card. y Insert the card with the label facing up and the arrow pointing in. Tips y To remove the card, gently press on the edge of the card and release it. Pull the card out and close the battery cover.
Setting the Display Language / Date & Time When using the camera for the first time after purchasing, be sure to choose a language and set the date & time before using the camera. Setting the Display Language 1 Turn the power on, and set the camera to the Setup Menu ( 2 Select [ y Press page 16). Language]. or to select [Language] then press or the SET button to launch the submenu. 3 Select a Language. y Press or to select a language and press or the SET button to apply the setting.
4 Apply the setting. y After adjusting the settings, press the SET or the MENU button to apply the setting. Caution y If the batteries are removed for about two days, the Date & Time setting will be lost. In this case, make these settings again. Downloaded From camera-usermanual.
Using the LCD Monitor The LCD monitor is used to compose images while recording, adjust settings and replay images. The following indicators may appear on the LCD monitor while recording or playing back images.
PLAY mode 1 Playback mode 6 Recording info 2 Protect 7 Battery 3 Voice memo 8 Captured date & time 4 File number / Total 9 Voice memo control 5 Storage media 10 DPOF 11 Resolution Caution y Some information may not display correctly if you display images captured by other camera model. Downloaded From camera-usermanual.
Changing the LCD Status Press the SET/DISP button changes the LCD status as shown below: REC mode (A) OSD on (B) Guide line (C) OSD off Tips y Use the “Guide line” to compose images easily before shooting images.
Basic Operation Turning the Power On and Off 1 Press the POWER button (n) to turn on the camera in the REC mode. y The power turns on, the lens extends and the LED lights in green. Press the PLAY button (o) to turn on the camera in the PLAY mode. y The power turns on, and an image displays on the LCD monitor (p). 2 Press the POWER button (n) again to turn the power off. y The power turns off, the lens retracts and the LED turns off.
Changing the Mode You can record images and voices in the REC mode. And using the PLAY mode to replay, delete, or edit images on the LCD monitor. Switching between REC mode and PLAY mode In REC mode, press the PLAY button (n) to switch to the PLAY mode. In PLAY mode, press the PLAY (n) or the MODE (o) button to switch to the REC mode. Selecting the REC mode 1 Set the camera to the REC mode ( page 13). 2 Launch the mode palette. y Press the MODE button (o) to show the scene mode palette.
Display Title Q Mode Landscape Portrait Snow Fireworks Night Scene Description Allows beginners to take pictures easily. Used for the wide scenic views. Blurring the background to focus on the subject. Used for the beach or snow scenes. Slow shutter speed to take fireworks exploding. Shooting the subject while keeping the background night scenery. Kids Take a still image to capture moving kids. Food Higher saturation makes food more appetizing. Building Text Enhance the edges of the subject.
Using the Menus When a menu is displayed, the four-way control and the SET button are used to make the desired settings. REC menu 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Open the REC menu. y Press the MENU button (n) to display the menu. 3 Select an item. y Press or (o) to select a menu item. 4 Change the setting. y Press or (o) to change the setting. 5 Press the MENU (n) or the SET (o) button to save the settings and close the menu.
Blue Date Stamp Off / Date / Date & Time 31 Digital Zoom Off / On REC menu list (Movie) 23 Menu Item Available Setting Page Movie Size / / 22 Metering / / 29 White Balance / Auto / / / / / 29 Setup menu 1 Turn the power on, and set the camera to the REC or PLAY mode ( 2 page 13). Press the MENU button (n) to open the REC or PLAY menu. y The menu displays depends on whether you are in the REC mode or the PLAY mode. 3 Open the Setup menu.
Setup menu list Menu Item Sounds Functions [Shutter]: Sets the shutter sound on and off. [Start-up]: Sets a type of the start-up sound. [Beep]: Sets the operation sound on and off. [Volume]: Adjusts the volume of the shutter sound, start-up sound, beep and playback sound. [Off]: The captured image will not automatically display after shooing. Auto Review [3 sec.]: The captured image will display for 3 seconds after shooting. [5 sec.
Menu Item Functions y Resetting the file number is useful for avoiding the file name duplication when images are downloaded to a computer ( page 49). You can review images on a television with a supplied AV cable ( TV Out page 43). TV Out should be set to either NTSC or PAL depending on your region. [NTSC]: America, Japan, Taiwan and others [PAL]: Europe, Oceania and others [Computer] / [Printer]: USB Sets the USB mode to connect the camera with a printer or computer ( S.Image page 44).
Basic Recording Recording Still Images 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Compose the subject on the monitor. y Aim the focus area (n) to the subject that you want to take. 3 Half press the shutter button to focus the image. y The focus area (n) becomes green while in focus, then shutter speed (o), aperture value (p) and ISO value (q) are displayed.
Using the Q mode The Q mode provides a simplified camera interface. Larger icons and fewer controls make it easier to take pictures anytime, especially for the beginners and elder users. You can use only the basic settings in the Q mode: Flash: Auto / Red eye / Force on / Slow sync / Force off Button Macro: Off / On SET/DISP: OSD on / Guide line / OSD off Resolution: 5M / 3:2 / 16:9 / 3M / 1M / VGA Menu Drive Mode: Off / 2 sec. / 10 sec. / Double / Burst Beep: Off / On Auto Review: Off / 3 sec. / 5 sec.
Setting the Resolution and Quality You can select lower image resolution and quality to decrease the image size to capture more images. Choose a suitable setting according to the desired image quality and purpose. For detail operation, see page 15. Resolution Values Image Size 2560 x 1920 2560 x 1712 Print Size Larger Printing larger than A4-size. 2560 x 1440 2048 x 1536 1024 x 768 Printing to postcards or attaching to 640 x 480 e-mail.
Recording Movie Clips 1 Turn the power on, and set the camera to the Movie mode ( 2 page 13). Compose the subject on the monitor. Aim the focus area (q) to the subject y that you want to take. The LCD monitor displays the available y recording time (p). 3 Start recording. Press the shutter button (n) to start y recording. Using the zoom button (o) to adjust the y image size.
Using the Zoom Function Your camera has a combination of optical and digital zoom functions that allows you to zoom in on far away subjects or zoom out for a wide angle shot. The optical zoom is achieved by mechanically adjusting the lens of the camera. The digital zoom enlarges or shrinks the image using a software process. 1 Make the zoom setting, and point the camera at the subject. 2 Press the zoom button (n) to compose the image. [W]: zoom out for a wide-angle shot.
Using the Flash The flash is not only for taking pictures when there is insufficient light, but also when the subject is in shade or in backlight conditions. Press the flash button cycles your camera through the various flash modes. The flash will not activate when continuous shooting or movie recording. 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Press the flash button (n) changes the flash mode. y Each time the flash button is pressed, the flash icon (o) changes.
Using the Macro Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 15 cm from the lens when in the maximum wide angle (zoomed out) setting and 40 cm in the maximum telephoto (zoomed in) setting. 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Press the macro button (n) enters the macro mode. y The macro icon (o) displays in the LCD monitor.
Using the Self-timer & Burst Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. Use the burst to record continuous still images shooting. 1 Turn the power on, and set the camera to the REC mode ( 2 page 13). Open the REC menu ( y Use or page 15). to select [Drive mode] from the REC menu. 3 Change the setting. y Press or to select a drive mode, then press the SET button. Off: Record a single image. 2 sec.
Recording and Playing Voices Recording Audio Clips 1 Turn the power on, and set the camera to the Voice REC mode ( 2 page 13). Press the shutter button (n) to start recording. y The voices are recorded from the microphone (o) of the camera. Be careful to avoid touching the microphone while recording 3 Press the shutter button again to end recording. y The camera will stop recording automatically when the memory capacity has been reached.
Adding a Voice Memo You can add a voice memo to the still images after you record it. Recording a Voice Memo 1 Turn the power on, and set the camera to the PLAY mode ( 2 Press or page 13). to select a still image that you want to add a voice memo. y If the image already has the voice memo recorded, the appears on the LCD monitor. The new recording will replace the previous one. 3 Open the PLAY menu.
Other Recording Functions Setting the Metering There are 3 different light metering options available on your camera. Option Description Light is measured from the entire shooting screen, but gives more importance to the values near the center. Selects an exposure based on readings from multiple points in the subject area Selects an exposure based on a single reading taken from the center of your picture.
Setting the ISO With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. Option Auto Description Sets the ISO sensitivity automatically. ISO 50 Sets the sensitivity to ISO 50 equivalent. ISO 100 Sets the sensitivity to ISO 100 equivalent. ISO 200 Sets the sensitivity to ISO 200 equivalent. ISO 400 Sets the sensitivity to ISO 400 equivalent. Tips y Higher ISO speeds increase the image noise.
Setting the Sharpness You can select whether you want the image to have sharp or soft outlines. Option Description The edges of the image are emphasized. The edges will become sharp, but noise may occur in the recording image. The edges of the image are sharp. This is suitable for printing. The edges of the image are softened. This is suitable for editing images on PC. Setting the Photo Effect You can add special effects to your images in Record mode or in Playback mode.
Playback Playing Back Images 1 Turn the power on, and set the camera to the PLAY mode ( y page 13). The latest recorded image appears on the LCD monitor. y If there are no images stored, a message [No image] appears. 2 Press the four-way control or (n) y : displays the previous image. y : displays the next image. Tips y Holding down or scrolls images in a high speed. Playing Back Movie Clips 1 2 3 Turn the power on, and set the camera to the PLAY mode ( Press or page 13).
paused. Magnifying & Trimming Still Images 1 Turn the power on, and set the camera to the PLAY mode ( 2 page 13). Select an image. y Press or (p) to select the image that you want to magnify or trimming. y Only still images can be magnified and trimmed. 3 Magnify the image. y Press [T] (n) to magnify the image, and the central portion of the image is displayed. You can use the arrow button (p) to view different parts of the y 4 Trim the image. y 5 magnified image.
Viewing in Thumbnail 1 Turn the power on, and set the camera to the PLAY mode ( 2 page 13). Press the zoom button [W], a thumbnail screen is displayed. 3 Use the four-way control to select the desired image, and press [T] or the SET button to show the selected image in full screen. Tips y You can protect or delete multiple images in thumbnail, see page 36, 38. Playing a Slide Show 1 Turn the power on, and set the camera to the PLAY mode ( 2 page 13). Enter the slide show.
Playing the slide show. y Press the SET button (o) to start the slideshow. y During the slideshow, press the SET button (o) to pause the slideshow and press the SET button again to resume. Deleting Files Deleting a Single File 1 Turn the power on, and set the camera to the PLAY mode ( 2 page 13). Open the menu. y Press the MENU button (n), then use the four-way control (o) to select Delete ( 3 Press ) and press the SET button (o). or (o) to select [SINGLE], and then press the SET button (o).
Deleting Multiple Files 1 Turn the power on, and set the camera to the thumbnail screen ( 2 page 34). Open the menu. y Press the MENU button, then Press to select to select Delete ( or press the SET button. 3 Press y 4 or ) and to select [Select], and then press the SET button. The frame of the selected image turns green. Select multiple images. y Use the four-way control to select the image. y Press the SET button toggles the on and off.
Press 4 or to select [ALL], and then press the SET button. Press the SET button to delete all unprotected images. Protecting a Single File 1 2 Turn the power on, and set the camera to the PLAY mode ( page 13). Open the menu. y Press the MENU button, then use the four-way control to select Protect ( ) and press the SET button. 3 Press or to select [SINGLE], and then press the SET button. 4 Press or to select the image you want to protect. 5 Press the SET button to protect the image.
Press y or to select [Lock all], and then press the SET button. To unlock all files, select [Unlock all] in this step, then press the SET button. 4 Press the SET button to protect all images. Protecting Multiple Files 1 Turn the power on, and set the camera to the thumbnail screen ( 2 page 34). Open the menu. y Press the MENU button, then Press or to select to select Protect ( ) and press the SET button. 3 Press y 4 or to select [Select], and then press the SET button.
Editing Images Rotating Still Images 1 Turn the power on, and set the camera to the PLAY mode ( 2 Press or page 13). to select the image you want to rotate. 3 Open the menu. y Press the MENU button, then use the four-way control to select Rotate ( 4 Press the SET button to rotate the image. y 5 ) and press the SET button. Each press rotates the image 90 degrees in clockwise Press or to select OK, and then press the SET button to finish rotating.
Changing the Image with Effects 1 2 3 Turn the power on, and set the camera to the PLAY mode ( Press to select the image you want to add the effect. Open the menu. y Press the MENU button, then use the four-way control to select Effect ( 4 or page 13). Press y ) and press the SET button. or to select an option, and then press the SET button. The edited image will be saved as a new file. Copying the Files You may copy the data from the camera’s internal memory to the memory card for convenience.
Setting the DPOF The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer. 1 Turn the power on, and set the camera to the PLAY mode ( 2 page 13). Open the menu.
Choosing a Startup Image 1 Turn the power on, and set the camera to the PLAY mode ( 2 Open the menu. y Press the MENU button, then use the four-way control to select S.Image ( 3 page 13). Press ) and press the SET button. or to select the image you want, then press the SET button to apply the choice. y A message “Completed” appears. 4 Set the camera to the Setup Menu ( 5 Press or then press 6 Press or to select S.Image ( page 16). ) or the SET button.
Making Connections Connecting the Camera to a TV You can display recorded images on a television with a supplied AV cable. 1 Set the TV out to match the TV system that you are using ( 2 Turn off the camera and the TV. 3 Use the supplied AV cable to connect the camera to the TV set. 4 Set the TV input signal to Video In. y 5 page 18). Refer to the documentation included with your TV for more information. Display on TV.
Connecting the Camera to a PC There are two ways to download files from the camera’s internal memory or memory card to a computer: y Inserting the memory card into a card reader y Connecting the camera to a computer using the supplied USB cable Using the Card Reader 1 Eject the memory from the camera and insert it in a card reader that is connected to a computer. 2 Open [My Computer] or [Windows Explorer] and double-click the removable drive icon that represents the memory card.
Double-click the “Removable Disk” icon to view its contents. y Files stored on camera are located in the folder name “DCIM”. Software Installation System Requirements Windows: y PC with processor better than MMX Pentium 233 MHz y Windows XP/2000/ME/98SE/98 y Minimum 32 MB RAM y USB port y CD-ROM drive y 800x600 pixels, 16-bit color display compatible monitor Macintosh: y Power Mac G3 or later y Mac OS 9.0, 9.1, 9.
*Specifications are subject to change without prior notice. Installing the Software The bundled software CD has the drivers and software that come with camera. Insert the CD into your CD-ROM drive. The autorun menu appears: The following software is listed: y Install Ulead Photo Explorer 8 SE Basic Installs software for organizing and keeping track of you media. y Install VideoStudio 7 SE VCD Installs software for editing captured movies.
Computer] or [Windows Explorer] and double-click the file named [autorun.exe] to start the program. You can also click [Run] in the Windows Startup menu, enter “D:\autorun.exe”（where D is your CD-ROM drive letter） in the text box, and click [OK]. Installing the Software Driver Windows 98 (Second Edition) requires the installation if the driver to use the camera as a mass storage device. 1 Install the included software installation CD-Rom in you computer’s CD-ROM drive. The autorun menu appears.
Installing VideoStudio 7 SE VCD VideoStudio 7 SE VCD is a video editing application that is included on the software installation CD-ROM. This software requires Windows 98 Second Edition, Windows ME, Windows 2000, or Windows XP on your computer. 1 Install the included software installation CD-Rom in you computer’s CD-ROM drive. The autorun menu appears. 2 Click [Installing VideoStudio 7 SE VCD]. 3 Select a language and follow the on-screen instructions to install the drivers.
VideoStudio 7 SE VCD. Appendix About the Folder & File Name Your digital camera automatically creates a directory of folders in the internal memory or memory card that it uses to organize still images, movie clips and other information. Folder Structure Folder name begins with a 3-digit number from 100 to 999 and followed by “DICAM”, each folder holds up to 9999 files. If new files are made, a new folder named in sequence will be made automatically.
computer. It may be unable to playback the data using the digital camera. Troubleshooting Problem Power does not turn on. Cause Solution Battery is inserted in the Reload battery in the correct wrong direction. direction. Batteries are dead. Replace or recharge batteries. The battery compartment Make sure the battery door is open. compartment door is securely closed. The camera does not take The flash is charging. Wait for the flash to charge. pictures. Memory is full.
the USB cable. computer / turn the camera on.
Still Capture Mode Function ISO Cloudy { ² ² ² ² ² ² ² ² ² ² ² ² { ² Tungsten { ² ² ² ² ² ² ² ² ² ² ² ² { ² Fluor_H { ² ² ² ² ² ² ² ² ² ² ² ² { ² Fluor_L { ² ² ² ² ² ² ² ² ² ² ² ² { ² Custom { ² ² ² ² ² ² ² ² ² ² ² ² { ² Auto 3 z z z z z z z ² z z z z ² ² 50 { ² ² ² ² ² ² ² z ² ² ² ² ² ² 100 { ² ² ² ² ² ² ² ² ² ² ² ² ² ² 200 { ² ² ² ² ² ² ² ² ² ² ² ² ² ² 400 {
Still Capture Mode Function Date & Time { z { { { { { { { { { { { ² ² Off { z { { { { { { { { { { { ² ² On 3 ² { { { { { { { { { { { ² ² Digital Zoom 3 : Factory setting z: Default {: Available ²: Not available : Setting is retained even after mode switch or power off (*): Set to [OFF] after power off. Specifications Sensor 5 megapixel CCD, Size : 1/2.5 inch Lens Focal length: f=6.2 ~ 18.6mm , 3X optical zoom, 4X digital zoom LCD monitor 2.
Microphone Built-in Speaker Built-in Dimension 89,5 x 61 x 27 mm Weight Camera Body w/o battery: Approx. 128 g *These specifications are subject to change without notice. Customer care More information on the complete product range can be found under: www.plawa.com Service & Repair Hotline (EU): 00800 75292100 For Greece: 00 800 491 291 62 Service & Support Hotline (Germany): 0900 1000 042 (1.49 Euro/ min. Deutsche Telekom) Online Service: support-apdc@plawa.
Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
AGFAPHOTO is used under license of Agfa-Gevaert AG. Agfa-Gevaert AG does not manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. All other brands and product names are registered trademarks of their respective owners. Product design and technical features can be changed without notice. Downloaded From camera-usermanual.com Agfa Manuals AgfaPhoto Holding GmbH, www.agfaphoto.
