User manual

25
On opening the camera back, the counting mechanism automatically returns to its
starting position A, i.e., it is already at the correct setting for the next film insertion. The
only other operation required is the transfer of the empty spool to the take-up side. It is
advisable to give the transport knob a short turn until cog is vertical so that it can be
easily and fully inserted in the
slotted recess of the empty spool.
The lower spool peg is retracted by
a short left turn of the knurled disc
(fig. 14) – the empty spool is
depressed – and the peg, by a
right turn of the knurled disc,
inserted into the round hole of the
spool. The camera is now ready to
receive the next film.
Fig. 14