User manual

UNLOADING THE CAMERA

After the 12

exposure the transport

knob is turned repeatedly until a

resistance is felt. The back is

opened – on no account in direct

sunlight – by unlocking it as

described on page 8 – but not fully.

A few further turns of the transport

knob will completely wind the end

of the backing paper still protruding

over the film channel.

The back is now opened fully, the knurled knob of the take-up side gripped (see fig. 13)

and turned fully to the left. Slight oblique pressure on the upper spool flange lifts the

spool a little, so that it can be easily taken out and removed as shown in the illustration.

The spool should be held firmly, secured with adhesive tape at once and placed in a

light-tight wrapping.

Fig. 13