Specifications

Global Services North America

Wilmington MA 01887

Power Consumption:

Maximum Power: 4 KW

BTUs (Max): 13648.57

Power Requirements for the Anapurna M4F:

The following electrical requirements must be provided to your electrician.

• Single phase, 208 Volts

• 40 Amp, 60Hz, dedicated circuit with ground, no neutral

• The electrician must provide the proper power cord. (See Note 3)

• The printer should have a twist lock plug/receptacle (L6-30 R/P). So that Agfa service can

disconnect power when needed.

• Buck boost transformer wiring diagram is on page 10

Important

1. The printer operating voltage range is: 230 – 240 VAC, we need to increase the 208

Voltage to this range for the UV lamps to properly cure the ink. A Buck/Boost

transformer will be required to increase the 208 volts to this range. See pages 9,

10, and 11 for transformer data, configuration, and a sample transformer.

2. To minimize voltage loss the buck boost transformers should always be located

near the .

3. The length of the power cord should be 9 Feet plus the distance to the outlet or

power drop. The plug/receptacle should be a twist lock (Ex: Hubbell L6-30 P/R)

design in accordance with local electrical codes. Agfa Service will need to be able

to disconnect power when required.

If your electrician has any questions please contact AGFA at 1 800 879 2432

Questions? Contact 800-879-2432 and ask for an Anapurna Specialist