Specifications

Global Services North America

Wilmington MA 01887

Compressed Air Supply

Printer Air Connection: An adapter (shown below) is needed to connect the air hose from the air

regulator to the printer. This should be purchased locally.

Printer Air Pressure:

24/7 air regulation is required to avoid ink contamination. A regulator must

be supplied by the customer and located near the printer. The regulator

should be set to 80 PSI.

Compressor:

3 - 5 HP, Min 60 - 80 gallons or better tank. The compressors regulator should be

set between 105 - 110 PSI for trip OFF and to 85 PSI to trip ON.

Printer Air Volume:

.28 CFM or 2 gallons/per minute

Compressor Air Quality:

Air Filters are required to eliminate moisture (No Water/No Oil)

Customers must provide: Air - Water – Oil filtration and in situations where the compressor is over 100 feet

away from the printer, provide the proper air line diameter to minimize loss.

Sample regulator for 3/8”

fittings with regulator

and filtration. It can be

mounted on the printer

or closest wall.

The 6 mm tube which is supplied

with the printer fits into the adapter

then into a similar port on the . The

threaded 3/8” end then screws into

the air regulator.

Recommended:

Compressor, 60 G 5HP

Compressor Single Stage Compressor, Motor Running HP 5, Free Air

CFM @ 90 PSI 16.0, @ Max Pressure 14.2, Volts 208-230, Phase 3, Amp

Draw 13.4-13.2/6.6, Tank 60 Gal, Tank Type Vertical, FNPT Outlet 3/4 In,

Maximum Pressure 140 PSI, Duty Cycle 80/20, Pump Type Cast Iron,

Pump Oil Capacity 17 Oz, Splash Lubrication, Torxter Not Required,

Thermal Protection, Stationary, For Shop or Maintenance Facility General

Air Tool Operation, Length 23 In, Width 31 In, Height 71 Inches

Source: www.grainger.com item # 4ME98

Compressor, 3 HP

High Performance Cast Iron Air Compressor, Motor Running Power 3.0

HP, Free Air Flow @ Maximum Pressure 10.3 CFM, Free Air Flow @ 90

psi 11.3 CFM, Maximum Pressure 135 PSI, Phase Single, Voltage Rating

230 Volts, Current Rating 14.7 Amps, Tank Capacity 60 Gallons, Tank

Type Vertical, Height 66 Inches, Length 20 Inches, Width 23 Inches, NPT

Outlet (F) 1/2 Inches, 60 Hz

Source: www.grainger.com item # 4YW09

Questions? Contact 800-879-2432 and ask for an Anapurna Specialist