Specifications
Global Services North America
Wilmington MA 01887
System Dimensions and Weights
Dimensions Uncrated Dimensions Crated Weight:
H = 5.3 Feet (1.6M) H = 6.9 Feet (2.1M) Crated: 3644 lbs (1653 Kg)
W = 11.8 Feet (3.6M) W = 13 Feet (3.9M) Uncrated:2165 lbs (980 Kg)
D = 4.8 Feet (1.5 M) D = 7.2 Feet (2.2M)
Dock & building access
NOTE:
The Anapurna M4F ships in a single wooden crate with the standard media tables inside. The crate
panels and top cover are secured with 8 mm hex head bolts. Riggers will be required to open the crate
and lift the printer off the pallet to move it to position.
Shipping and Delivery
No Truck Height Loading Dock: Due to the width of the Anapurna M4F crate (13 Feet) it is important
that the freight vehicle delivering the printer have a lift gate. This will allow the forklift to pull the crate
length-wise to the lift gate and together with the forklift supporting one end. The crate can then be safely
lowered to the ground.
With Truck Height Loading Dock: The load dock area must have enough vertical height and space for
the forklift to be able to lift the printer off the pallet.
Forklift Requirements
4409 lbs or 2000 Kg or higher capacity to lift the printer crate.
The forklift blades should be at least 60 inches or 1500 mm in length.
The distance between the fork lift blades should be 41 inches or 1050 mm apart.
Floor Strength and Flatness
The floor must be level with a maximum incline or waviness of +/- 1.3 cm across the footprint.
Do not install on carpet.
Doors and Hallway Access
The customer must provide free access through doors and hallways from the entrance to the Anapurna
location so that the printer can be rolled to its position. It will be the customer’s responsibility to have the
system moved to the location of where the Anapurna will be installed. An AGFA Service representative
will be present to assist with moving the equipment. Once on its wheels the printer can be rolled to
position, make sure to provide ramps as necessary to clear any thresholds.
Minimum Door Way Width: 58 (Inches) or 147.3 (CM) Uncrated **
62 (Inches) or 157.5 (CM) Crated
** Roll to Roll brackets come preinstalled, they can be removed
to reduce the door way width requirement to 43.3 inches or
1100mm.
Minimum Door Way Height: 7.0 (feet) or 213 (CM) Uncrated
7.0 (feet) or 213 (CM) Crated
Questions? Contact 800-879-2432 and ask for an Anapurna Specialist
4