User Manual Part 2

140
2852 A EN 20070205
DRYSTAR AXYS
3 Press the Confirm button.
•If the “Overrule RF-tag Reading” Setting is active, the following message is displayed:
•If the “Overrule RF-tag Reading” Setting is not activated, the following message will
be displayed:
4 Press the Confirm key again to resume printing using a limited Maximum Den-
sity.
Note: In this case, press the Confirm key to initiate the loading procedure
again or call your local service organization to enable the “Overrule RF-tag
Reading” Setting.
OVERRULE
IDENTIFICATION CODE
IS ACTIVE
Dmax is limited due
to safety reasons
Re-enable printing
by inserting correct
film media pack.