User Manual Part 2

138
2852 A EN 20070205
DRYSTAR AXYS
No identification code detected
This error message appears when the Film Identification tag is not readable.
There are two possible solutions for this problem:
Q Reload the current film pack or load another film pack
Q Overrule the Film Identification tag of the film pack
To reload the current or another film pack
1 In case the Drystar AXYS does not start printing after re-inserting a film pack,
first check if this film pack is inserted correctly.
If the Drystar AXYS still does not resume printing, the following message will appear:
2 Open the input tray and check again if the film pack is inserted correctly. If you
re-insert the film pack, the Drystar AXYS will perform the same check sequence
until printing is resumed.
Remove and re-insert
film pack -including
protective sheet-
properly. follow
loading instructions