User Manual Part 2

136

2852 A EN 20070205

DRYSTAR AXYS

Unauthorized opening of the printer

A jam can be caused by opening the printer covers or one of the input trays

while a film is actually being printed.

The following screen indicates that a jam has occurred:

1 Remove the jammed sheet.

Refer to “Clearing of film jams” on page 129 .

2 Press the Confirm key to continue.

3 Make sure to follow carefully the procedures as described in this manual before

attempting to open the printer.

Refer to “Switching off the Drystar AXYS” on page 63 .

printing. Next time

wait until printer

is in "Ready"

condition.