User Manual Part 2

135
2852 A EN 20070205
DRYSTAR AXYS
4 Gently remove the film sheet(s).
5 If the film jam has been cleared, close the printer. You can resume work.
Note: Never use force to clear the jammed film. If it is not possible to gently
remove the jammed film by pressing the transport buttons, proceed with
the procedure as follows.
Note: Verify that no film sheets remain in the print head compartment.
WARNING: Never reuse a jammed film. This may cause damage to
the thermal head and/or dust problems.
Note: If the jam is still not cleared, call your local service organization.