User Manual Part 2

130
2852 A EN 20070205
DRYSTAR AXYS
Film input tray jams
A film jam in the input tray can occur when the Drystar AXYS is opened while a
film is currently printed, or when an individual film is incorrectly inserted in
the input tray. Refer also to “Film identification problems” on page 137 .
The following screen indicates that a jam occurred in the input tray.
To remove a jammed film in the input tray:
1 Open the film input tray.
If a film is jammed, gently remove the sheet. Reposition the film stack in the film tray,
making sure that all the sheets are kept correctly
(refer to “Loading films” on page 76 ).
Note: Never use force to clear the jammed film. If it is not possible to gently
remove the jammed film, call your local service organization.