User Manual Part 2

122
2852 A EN 20070205
DRYSTAR AXYS
Cleaning the exterior
Procedure
1 Switch off the Drystar AXYS by following the procedure as described in
“Switching off the Drystar AXYS” on page 63
2 Remove the power plug from the socket.
3 Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner. Be
careful not to get any liquid in the power cord port.
4 Plug in the printer and switch it on by following the procedure as described in
“Switching on the Drystar AXYS” on page 48.