User Manual Part 1

31
2852 A EN 20070205
DRYSTAR AXYS
Transport after installation
The Drystar AXYS is quite compact, so moving the printer over a short distance -
if required - can be done in a convenient way.
Always keep in mind the following safety guidelines:
Figure 8: Transport posibilities
Note: Refer to “Safety Directions” on page 43.
WARNING: The Drystar AXYS should be transported by 3 persons
or if not possible with 2.
WARNING: The Drystar AXYS must only be transported with all
covers closed.
WARNING: Always lift the Drystar AXYS by gripping the handles,
situated at front, left and right side. Do not lift the Drystar AXYS
by the output tray.
WARNING: When transporting the Drystar AXYS, the stability and
the structure of the tabletop have to be taken into account.
The printer should not be placed on a soft surface, since this might
prevent appropriate ventilation and cause overheating.
Make sure the printer is placed on a stable, hard surface table.