User's Manual

2852 A EN 20070205

DRYSTAR AXYS

Working with Compact flash cards

(CF-card)

The Drystar AXYS is equipped with an external CF-card slot, which is located at

the rear side.

To insert a CF-card in the Drystar AXYS:

1 Hold the CF-card vertically with the connector holes in front of the slot and with

the flat surface pointing to the left. In that case the cut-away (a) and the rim (b)

are pointing to the right.

2 Insert the CF-card gently into the slot and push it until the unlocking lever

underneath the slot comes out.

Note: If you cannot push the CF-card completely into its position, this

means that you have to turn it 180 degrees (while keeping the connector

holes faced to the slot).