User's Manual

121
2852 A EN 20070205
DRYSTAR AXYS
Preventive maintenance schedule
The Drystar AXYS is designed for trouble-free operation. Maintenance and
cleaning involve only some minor user tasks. Refer to the following pages for
the appropriate cleaning procedure.
Safety guidelines
Q Do not lubricate the printer.
Q Do not attempt to disassemble the printer.
Q Do not touch the resistor line of the print head.
Q Always switch off the Drystar AXYS and disconnect the power cord from the
outlet before carrying out any maintenance work inside the printer.
Interval What to do?
Ad hoc “Cleaning the exterior” on page 122
When image quality tends to
degrade. An appropriate warning
message is displayed.
“Cleaning the print head” on page 123
WARNING: To prevent damage to the printer while performing
maintenance, observe the following safety precautions:
Caution: Film jam removal or cleaning the printer head can be done
without switching the power off. Nevertheless, care should be taken
and the “Safety Directions” on page 43 should be respected.