User Manual
Table Of Contents
- Table of contents
- Introducing the Drystar 5302
- Basic operation (Operator mode)
- Advanced operation (key-operator mode)
- Equipment information sheet
- Quality Control Charts
60
2831A EN 20041201Advanced operation (key-operator mode)
DRYSTAR 5302 USER MANUAL
Cleaning the exterior
1 Switch off the Drystar 5302 by following the procedure as described in
‘Switching off the Drystar 5302’ on page 32.
2 Remove the power plug from the socket.
3 Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner. Be
careful not to get any liquid in the power cord port.
4 Plug in the printer and switch it on by following the procedure as described in
‘Switching on the Drystar 5302’ on page 30.