User Manual

32
2831A EN 20041201Introducing the Drystar 5302
DRYSTAR 5302 USER MANUAL
Switching off the Drystar 5302
When you want to switch off the printer, it is recommended to follow the
procedure as described below, to make sure that any pending print jobs have
finished printing.
1 Make sure that pending jobs are correctly finished. If necessary, follow the
procedure to stop printing.
2 Press the Power/Reset button to switch off the Drystar 5302.
• If the printer is ready, it shuts down immediately:
• If the printer is busy printing images, it will first print all images in the memory before
shutting down:
• If there is an error/warning/incident during power off and there are still unprinted
images in the memory, the following message is displayed:
Press the Confirm button (YES) to proceed with the power-off, or the Escape button
(NO) to quit.
Powering off the printer with unprinted images in memory may result in
image loss!
Power off initiated
Please wait
Power off after
finishing images in
memory
Please wait
Are you sure to
power off the
printer? (images in
queue will be lost)