User Manual
Table Of Contents
- Table of contents
- Introducing the Drystar 5302
- Basic operation (Operator mode)
- Advanced operation (key-operator mode)
- Equipment information sheet
- Quality Control Charts
31
2831A EN 20041201 Introducing the Drystar 5302
DRYSTAR 5302 USER MANUAL
2 The printer is ready for operation:
• If, on the front panel display, the READY message is shown, the status indicator LED
is constantly green.
• If, on the front panel display, the print queue screen is shown, the status indicator
LED is green and blinking.
3 Make sure that the printer is loaded with appropriate consumables.
It takes 13 minutes (starting up of the Drystar 5302 and heating up of the thermal
print head) before you can start printing. The display will inform you that the
printer is warming up:
Refer to page 38 for detailed information on loading films.
If the job status displays a warning or error indication, refer to ‘Troubleshooting
checklist’ on page 65.
READY
WARMING UP
Please wait
Modaname 10:21:34 PR
film 1 of 6
62%
Modaname 10:21:34 CA
xx Jobs in memory WA