User Manual

27
2831A EN 20041201 Introducing the Drystar 5302
DRYSTAR 5302 USER MANUAL
The display
The Drystar 5302 control panel has a backlit LCD display. We distinguish two
panel types depending on the selected language:
• a backlit LCD display with 4 lines for Western languages (e.g. Dutch,
French, Portuguese, Swedish, ...).
• a backlit LCD display with 2 lines for Eastern language (e.g. Greek,
Chinese, Korean, Polish, ...).
Whether a display is translated or not depends on the operating mode.
General display features
The figure below shows how the display is illustrated in this manual:
The visible display lines are indicated in the grey zone. The other possible
lines are shown in the white area and can be reached by scrolling using the
Up/Down arrow keys on the Keypad.
In the upper right corner, the current printer status is displayed:
• In Operator mode, two characters display the print queue status. Refer to
‘Managing the print queue’ on page 35.
• In Key-operator mode, two characters are displayed in reverse video to
indicate the current menu- or submenu level (e.g. ‘KO’ for Key-operator
main level).
• A warning, an error or a maintenance request is displayed respectively with
the character W, E and M.
please WAIT
Self Test
proceeding
Autotest:
CZEKAJ...
1 Show settings
2 Change settings
3 Print image
4 Save configuration
5 Restore config.
6 Calibration
7 Service actions
8 Quality control
9 Installation
KO
Reachable with Up/Down arrow keys
Visible