User's Manual Part 2

96
2920B EN 20031206
3 In both cases, the printer will ask you to insert a CF-card:
4 Insert a CF card.
" Refer to ‘Inserting a CF-card’ on page 21.
5 If there are already save set files present on the CF-card, a list is shown.
The ‘Select dataset’ screen is displayed:
6 Press the up/down arrow keys to select the desired save set file, followed by
the Confirm key.
The printer saves the configuration on the external CF-card:
When the writing of the save set is finished, the printer will ask you to remove the
CF-card:
7 Remove the CF-card.
" Refer to ‘Removing a CF-card’ on page 22.
As soon as the CF-card has been removed, the following screen is displayed:
8 Press the Confirm key. The program will return to the key-operator menu.
SC
Save
Configuration
Please insert card
SC
Select dataset
Dataset xyz v1.00
Dataset abc v1.00
Dataset def v1.00
etc...
SC
Save Config
C:/<path><filename>
to
A:/<path><filename>
SC
Save
Configuration
Please remove card
SC
Please note that
<save_set_name>
was written to the
CF-card as backup