User's Manual Part 2

95
2920B EN 20031206
Saving the configuration settings
Each time the settings have been changed and confirmed, an automatic
backup of the old configuration is made on the internal CF-card. You will also
be asked to create a backup on an external CF-card.
It is also possible (and recommended) to regularly make a backup of the
printer settings to ensure safe restoring of the values when required. In this
case you have the choice between saving the complete configuration or only
the network settings (e.g. for mobile installations).
Save configuration procedure
1
Press the Key-operator key to enter the key-operator mode.
2 On the key-operator main menu, press the Down key three times, followed by
the Confirm key to select ‘Save configuration’.
The ‘Save configuration’ screen is displayed:
• If you want to save the complete configuration, press the Confirm key to select
‘General’, and proceed with step 3.
• If you want to only save the network parameters (e.g. for mobile installations),
press the Down key, followed by the Confirm key to select ‘Network only’. The
printer will ask you to enter a name for the network save set:
Enter the save set name by means of the arrow keys. Refer to ‘Data entry’ on page 27.
Make sure not to enter more than 16 characters.
SC
Save
configuration
1 General
2 Network only
SC
Save Network
Please enter Name
[Hospital_01 ]
(max. 16 char.)