User's Manual Part 2

80
2920B EN 20031206
Adding a modality
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59.
2 On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3 On the ‘Network (DICOM)’ screen, press the Down key eight times, followed
by the Confirm key to select ‘Add modality’.
4 The ‘Collect info’ screen is displayed, asking you to gather the appropriate
information on the new modality (see your System Administrator if
necessary):
5 Press the Confirm key to continue, or the Escape key to quit the procedure
without any changes.
CS
1 Printer AE_Title
2Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
Collect info:
- Daily ModalityName
- Modality brand
- Modality type
- Modality AE_Title