User's Manual Part 2

79
2920B EN 20031206
Removing a modality
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59.
2 On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3 On the ‘Network (DICOM)’ screen, press the Down key seven times, followed
by the Confirm key to select ‘Remove modality’.
The ‘Remove modality’ screen is displayed:
The modality names - entered during the installation of the printer - are shown in the
list. If no names have been entered, the modality AE_Titles are shown instead. If a
nickname (daily used modality name) is also defined during installation, the
nickname is used.
4 Select the modality you wish to remove by means of the arrow keys, and
press the Confirm key.
A confirmation screen is displayed:
5 Press the Confirm key (YES) to remove the modality from the list, or the
Escape key (NO) to quit the procedure without any changes.
CS
1 Printer AE_Title
2Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
1 Modality16char
2 Modality16char
3 Modality16char
4 Modality16char
5 etc...
CS
Delete modality
Modality16char
YES (v) NO (x)