User's Manual Part 2

76
2920B EN 20031206
Changing the netmask
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59.
2 On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3 On the ‘Network (DICOM)’ screen, press the Down key five times, followed by
the Confirm key to select ‘Netmask’.
The ‘Netmask’ screen is displayed:
If the netmask has already been assigned, it will be shown on the display.
4 Enter the netmask by means of the arrow keys. Refer to ‘Data entry’ on
page 27.
" Note that blank spaces will be ignored (see example).
Example: if the netmask is 255.255.255.0, then the data entry should be as follows:
5 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
CS
1 Printer AE_Title
2Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
Netmask
255.255.255. 0
(255.255.255.255)
CS
Netmask
255.255.255. 0
(255.255.255.255)