User's Manual Part 2

74
2920B EN 20031206
Changing the service host IP address
1
Perform steps 1 to 2 of the ‘Accessing the Change settings menu’ procedure
on page 59.
2 On the Change settings menu, press the Down key twice, followed by the
Confirm key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
3 On the ‘Network (DICOM)’ screen, press the Down key four times, followed
by the Confirm key to select ‘Serv. Host IP add.’.
The ‘Service Host IP address’ screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
4 Enter the service host IP address by means of the arrow keys. Refer to ‘Data
entry’ on page 27.
" If no service host PC is installed, press the Confirm key. The service host
IP address will be set to ‘000.000.000.000’
" Note that blank spaces will be ignored (see examples on next page).
CS
1 Printer AE_Title
2Hostname
3 Domain name
4 Printer IP address
5 Serv. Host IP add.
6Netmask
7 Router IP address
8 Remove modality
9 Add modality
10 Alert mailing
CS
Serv.Host IP addr.
123.123.123.123
(255.255.255.255)