User's Manual Part 2

53
2920B EN 20031206
Viewing general image quality information
1
Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure,
on page 49.
2 On the Show settings menu, press the Down key three times, followed by the
Confirm key to select ‘Image quality’.
The following screen will appear:
3 Press the Confirm key to select ‘General’.
The automatic film calibration settings are displayed:
The following information is displayed on the automatic film calibration settings:
• whether the automatic film calibration is set (‘ON’, ‘OFF’),
• when ON, the automatic film calibration frequency (e.g. every ‘05’ film packs),
• the maximum density result value (e.g. ‘3.10’) of the last successful film
calibration.
4 Press the Confirm key to return to the Image quality menu.
5 In the Image quality menu, press the Escape key to return to the Show
settings menu.
SH
1 General
2 Def. densitometer
3 Modality16charac
4 Modality16charac
5 etc...
Film Calib.: ON
After 05 packs
MaxD result: 3.10
SH