User's Manual Part 2

50
2920B EN 20031206
Viewing general information
1
Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure,
on page 49.
2 On the Show settings menu, press the Confirm key to select ‘General’.
The ‘General’ info screen is displayed (example):
On the ‘General’ info screen you can see:
• the serial number of the printer,
• the language,
• the current time,
• the current date,
• the installation date,
• the number of films printed after the last print head cleaning,
• the total number of films printed,
• the currently installed software version,
• the automatic film calibration settings (OFF, ON every “99” packs),
• whether the printer should beep when the input tray is empty (NO, 5 times,
many).
" More information, such as site specific data can be viewed via the
browser only. Refer to Chapter 4, ‘Controlling the Drystar 5300 via a
remote PC (with browser)’.
3 Press the Confirm key to return to the Show settings menu.
Serial-No: 1024
Language: English
Time: 14.30
Date: 19 Aug 03
Install.: 01 Aug 03
No of films after
TPH cleaning: 99999
No of copies: 999999
SW version: xxxxxxx
Film calib.: ON 99
Beep on empty: NO
----------------------------
Site specific info
visible via browser
only
SH