User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
47
2920B EN 20031206
• You can scroll through the menu items by pressing the Down and Up keys and
select a menu item by pressing the Confirm key. The active keys are indicated by
their respective LEDs.
• At any moment you can press the Escape key on the main menu level to exit the
key-operator mode. If you press this key on a lower level menu you are returned
to the higher level menu. If you press this key on a data screen after entering
information, all changes on that screen are lost.
• If the key-operator does not interact with the menu for a longer period (five
minutes or more), the menu will time-out and revert back to the ready state. The
key-operator will receive a warning that the time-out is about to expire:
Press the Confirm key to return to the key-operator menu. Otherwise, the key-
operator menu will be closed.
" The Drystar 5300 will sound a long beep if you press a key that is not to
be used at that moment.
Time-out is
about
to expire...
KO