User's Manual Part 2

25
2920B EN 20031206
The display
The Drystar 5300 control panel has a backlit LCD display with 4 lines of
20 characters each (2 lines of 7 characters for Greek or Asian languages). Its
lay-out depends on the operating mode.
General display features
The figure below shows how the display is illustrated in this manual:
The visible display lines are indicated in the grey zone. The other possible
lines are shown in the white area, and can be reached by scrolling using the
Up/Down arrow keys on the Keypad.
In the upper right corner, the current printer status is displayed:
• In Operator mode, two characters display the print queue status. Refer to
‘Managing the print queue’ on page 33.
• In Key-operator mode, two characters are displayed in reverse video to indicate
the current menu- or submenu level (e.g. ‘KO’ for Key-operator main level).
1 Show settings
2 Change settings
3 Print image
4 Save configuration
5 Restore config.
6 Calibration
7 Service actions
8 Quality control
9 Installation
KO
Reachable with Up/Down arrow keys
Visible