User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
191
2920B EN 20031206
Network connectivity
Ethernet / connectors
RJ45 twisted pair for 100Base-TX;
Serial RS232 connection
Network protocols (TCP/IP services) FTP, Telnet, HTTP, SMTP
Image formats
DICOM (Default)
TIFF
Postscript Not available
Power consumption
During operation 250 W
In standby 40 W
Protection against
Electrical shocks Class 1 (grounded)
Ingress of water IPXØ
Environmental conditions (operation)
Room temperature Between +15°C and +30°C
Relative humidity
Between 10% and 80%
Note
: Films may not become wet!
Atmospheric pressure 70 kPa - 106 kPa
Environmental conditions (transport and storage)
Room temperature
Between -25°C and 55°C (storage)
Between -25°C and 70°C (transport)
Relative humidity Between 10% and 100%
Atmospheric pressure 70 kPa - 106 kPa
Noise emission (method of measurement in accordance with DIN 45635 part 19)
During operation Max. 56 dBA
In standby Max. 47 dBA