User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
181
2920B EN 20031206
Unauthorized opening of the printer
A jam can be caused by opening the printer covers or one of the input trays
while a film is actually being printed.
The following screen indicates that a jam has occurred:
1 Remove the jammed sheet.
Refer to ‘Clearing of film jams’ on page 175.
2 Press the Confirm key to continue.
3 Make sure to follow carefully the procedures as described in this manual
before attempting to open the printer.
Refer to ‘Switching off the Drystar 5300’ on page 30.
Refer to ‘Loading films’ on page 36.
A FILM JAM was
caused due to
opening of the
printer during
printing. Next time
wait until printer
is in ’READY’
condition