User's Manual Part 2
Table Of Contents
- Table of contents
- Introducing the Drystar5300
- Basic operation (Operator mode)
- Advanced operation (Key-operator mode)
- Overview of key-operator functions
- Viewing printer information
- Accessing the Show settings menu
- Viewing general information
- Viewing input tray information
- Viewing network (DICOM) information
- Viewing general image quality information
- Viewing default densitometer information
- Viewing image quality information of a modality
- Viewing installed data-sets information
- Viewing logical printers information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Maintaining optimal image quality
- Service actions
- Quality control procedure
- Installation operations
- Controlling the Drystar5300 via a remote PC (with browser)
- System description
- Preventive maintenance
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Index
137
2920B EN 20031206
Saving the configuration
A screen will ask you to insert the backup CF-card:
1 Insert the CF-card.
" Refer to ‘Inserting a CF-card’ on page 21.
As soon as the CF-card is inserted, the ‘Copy’ screen is displayed.
The printer saves the configuration on the CF-card.
When the writing process has finished, the following screen is displayed:
2 Remove the CF-card.
" Refer to ‘Removing a CF-card’ on page 22.
As soon as the CF-card is removed, the following screen is displayed:
3 Press the Confirm key.
You need to complete this step, otherwise all the install data you have
entered will be lost!
Save
configuration
Pls. Insert CF-card
IN
Copying
C:/<path><filename>
to
A:/<path><filename>
IN
Save_config
finished
Pls. remove CF-card
IN
Label card with:
’Backup card’
’Serial no: XXXX’
’Date and time:
yyyy-mmm-dd hh:mm:ss
IN