User's Manual Part 2

135
2920B EN 20031206
$ If you have selected ‘1 Enter via keypad’, the ‘Enter modality AE_Title’ screen
is displayed:
Enter the modality AE_Title by means of the arrow keys. Refer to ‘Data entry’ on
page 27. Make sure not to enter more than 16 characters.
9 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The ‘Preferred FILM TYPE for’ screen will appear:
" You can find the film type on the film packaging, e.g. ‘DRYSTAR DT2C’.
10 Press the up/down key to select the preferred film type for this modality.
If the current film type in the trays does not match the selected film type, the
following message is displayed:
11 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Enter modality
AE_Title:
[Name_____ __]
(max. 16 char)
IN
Preferred
FILM TYPE for:
Modality16char:
Drystar DT2B
Drystar DT2C
IN
Preferred
FILM TYPE for:
Modality16char:
IS CURRENTLY NOT
AVAILABLE IN INPUT
TRAY
IN