User's Manual Part 2

132
2920B EN 20031206
10 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The ‘Printer AE_Title’ screen is displayed:
If the Printer AE_Title has already been assigned, it will be shown on the display.
11 Change the Printer AE_Title by means of the arrow keys. Refer to ‘Data entry’
on page 27. Make sure not to enter more than 16 characters.
" Entries are case sensitive.
12 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
A screen summarizing the information you have entered will appear:
13 Press the Confirm key to go to step 2 of the installation wizard or press the
Escape key to repeat step 1.
Printer AE_Title:
[Drystar ]
(max. 16 char)
IN
Following data
is entered:
Printer IP address:
255.255.255.123
Service Host IP add:
000.000.000.000
Netmask:
255.255.255.255
Router IP address:
255.255.255.145
Printer AE_Title:
Drystar
--------------------------
x Repeat step 1
v Go to step 2
IN