User's Manual Part 2

130
2920B EN 20031206
Example 2: if the IP address is 123.1.123.123, then the data entry should be as
follows:
4 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
The ‘Service Host IP address’ screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
5 Enter the service host IP address by means of the arrow keys. Refer to ‘Data
entry’ on page 27.
" If no service host PC is installed, press the Confirm key. The service host
IP address will be set to ‘000.000.000.000’.
" Note that blank spaces will be ignored (see examples on next page).
Example 1: if the IP address is 123.001.123.123, then the data entry should be as
follows:
Example 2: if the IP address is 123.1.123.123, then the data entry should be as
follows:
6 Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Printer IP addr.:
123. 1.123.123
(255.255.255.255)
IN
Serv.Host IP addr.
123.123.123.123
(255.255.255.255)
IN
Serv.Host IP add:
123.001.123.123
(255.255.255.255)
IN
Serv.Host IP add:
123. 1.123.123
(255.255.255.255)
IN