User's Manual Part 2

129
2920B EN 20031206
Entering the printer network settings
Some instruction screens will show the information you need to complete this
part of the installation:
1 Press the Confirm key to continue.
2 Press the Confirm key to continue.
The ‘Printer IP address’ screen is displayed:
If the IP address has already been assigned, it will be shown on the display.
3 Press the up/down arrow keys to increment/decrement the numbers. Press
the left/right arrow keys to move through the fields. Press the Confirm key to
store the data.
" Refer to ‘Data entry’ on page 27.
" Note that blank spaces will be ignored (see examples below).
Example 1: if the IP address is 123.001.123.123, then the data entry should be as
follows:
Installation
wizard
Step 1: Printer
Network settings
IN
Information
concerning:
-Printer IP-address
-Service Host IP-addr
-Netmask
in case of subnets
-Router IP address
in case of subnets
-Printer AE_Title
----------------------------
ask network manager
for this info or use
automatic setting
IN
Printer IP addr.:
123.123.123.123
(255.255.255.255)
IN
Printer IP addr.:
123.001.123.123
(255.255.255.255)
IN