User Manual

94
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Changing Image quality setting for a modality - Selecting a lookup table
1 Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on
page 70.
2 On the ‘Change settings’ screen, press the Down key four times, followed by the
Confirm key to select ‘Image quality’.
The following screen will appear:
3 Press the Up/Down arrow keys to select the modality for which you want to
change the image quality settings.
The ‘Image quality’ screen for the selected modality is displayed:
4 Do one of the following:
• If you want to attribute the default profile, select ‘Profile default’ and press the
Confirm key.
You return to the screen of step 2.
• If you want to add a custom profile, select ‘Select other’ and press the Confirm key.
Proceed with step 5.
5 The ‘Image quality’ screen for the selected modality is displayed:
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 <Modality name>
6 <Modality name>
7 <Modality name>
<Modality name>
<Modality name>