User Manual

91
2900H EN 20071108 Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Changing the image quality settings
Changing general image quality settings - Film calibration
1 Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on
page 70.
2 On the ‘Change setting’ screen, press the Down key four times, followed by the
Confirm key to select ‘Image quality’.
The following screen will appear:
3 Press the Confirm key to select ‘General’.
The ‘General settings’ screen will appear:
4 Press the Confirm key to select ‘Film calibration’.
The ‘Select default for film calibration’ screen is displayed:
This setting is by default set to ON and will apply to every modality.
The current setting is marked with an *.
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 <Modality name>
6 <Modality name>
7 <Modality name>
*ON
OFF