User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
89
2900H EN 20071108 Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
11 Press the Up/Down arrow keys to select the appropriate modality AE-title.
• In case you have selected ‘1 Enter via keypad (manual)’, the ‘Enter modality AE-
title’ screen is displayed:
Enter the Modality AE-title by means of the arrow keys. Refer to ‘Data entry’ on
page 33. Make sure not to enter more than 16 characters.
12 Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
The ‘Select output tray for <daily name or AE-title>’ screen will appear:
Press the Up/Down arrow keys to select the output tray. You can (de)activate
the selected output tray with the Left/Right arrow keys.
13 Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
The ‘Select preferred film type for <daily name or AE-title>’ screen will appear:
Activated output trays are marked with an *.
‘DRYSTAR DT 2 Mammo’ is only shown in the list when the option for the
mammography application is activated. Refer to ‘Options and accessories’ on
page 235.
You can find the film type on the film packaging, e.g. ‘DRYSTAR DT 2 C’.
<daily name or AE-title>
*position 1 (upper)
position 2
posiiton 3
*
p
osition 4
(
lower
)
<daily name or AE-title>
1*DRYSTAR DT 2 B
2 DRYSTAR DT 2 C
3 DRYSTAR DT 2 Mammo