User Manual

Table Of Contents
78
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Changing Network (DICOM) configuration
Changing the Printer AE-title (Called AE-title)
1 Perform steps 1 to 2 of the Accessing the Change settings menu’ procedure on
page 70.
2 On the ‘Change setting’ screen, press the Down key three times, followed by the
Confirm key to select ‘Network Dicom’.
The ‘Network Dicom’ screen is displayed:
3 Press the Confirm key to select ‘Called AE-title’.
The ‘Called AE-title’ screen is displayed:
If the printer AE-Title has already been assigned, it will be shown on the display.
4 Change the printer AE-title by means of the arrow keys. Refer to ‘Data entry’ on
page 33. Make sure not to enter more than 16 characters.
5 Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
Entries are case sensitive.
e.g. DS5500e.g. DS5500