User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
77
2900H EN 20071108 Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Changing the input tray settings (upper / lower)
Changing the film view
1 Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 to select the ‘Upper input tray’ screen.
2 In the ‘Upper input tray’ screen, press the Down key twice, followed by the
Confirm key to select ‘Film view’.
The ‘Film view’ screen is displayed:
The current film view is indicated with an *.
3 Press the Up/Down arrow keys to select the desired film view.
4 Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
In the procedure, we will assume that the film view for the upper input tray is to be
changed. The procedure for the lower input tray is identical.
1* Normal
2Back