User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
7
2900H EN 20071108
DRYSTAR 5500/5503 REFERENCE MANUAL
About this manual
Scope
The Drystar 5500/5503 Reference manual is intended for both the
Drystar 5500 and the Drystar 5503 printers.
The only difference between both printers is the number of input trays:
• The Drystar 5500 is fitted with two input trays,
named Upper input tray and Lower input tray.
• The Drystar 5503 is fitted with three input trays,
named Upper input tray, Middle input tray and Lower input tray.
The operation is identical for each input tray.
This manual only deals with the Drystar 5500 printer, equipped with two trays.
As the operation of the Middle input tray is identical to the Upper and Lower input
tray, this manual is also applicable for the Drystar 5503 printer equipped with
three trays.
Upper
Lower
Upper
Middle
Lower