User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
64
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Viewing network (DICOM) information
1 Perform steps 1 and 2 of the ‘Accessing the Show settings menu’ procedure, on
page 61.
2 On the Show settings menu, press the Down key twice, followed by the Confirm
key to select ‘Network (DICOM)’.
The ‘Network (DICOM)’ screen is displayed:
The following network (DICOM) parameters are displayed:
• AE-title,
• Host name,
• Domain,
• Printer IP-address,
• Netmask,
• Router,
• MAC address.
3 Press the Confirm key to return to the Show settings menu.
DS5500
ds5500
xxxxxx
08:00:66:80:
e.g.
Prt IP-ad:123.123.123.123
Netmask:255.255.255.255
Router:123.123.123.123