User Manual
Table Of Contents
- Table of contents
- About this manual
- Introducing the Drystar 5500
- Basic operation (operator mode)
- Advanced operation (Key-operator mode)
- Overview of Key-operator functions
- Stopping the printing process
- Viewing printer information
- Changing the configuration settings
- Printing images
- Saving the configuration settings
- Restoring the configuration settings
- Performing the calibration procedures
- Installation
- Quality control for general radiography applications (DT 2 B & DT 2 C)
- Quality control for mammography application (DT 2 Mammo) (optional)
- Controlling the Drystar 5500 via a remote PC (with browser)
- System description
- Preventive maintenance and replacements
- Troubleshooting
- Equipment information sheet
- Drystar media density response data
- Quality Control Charts
- Remarks for HF-emission and immunity
- Remarks for HF-emission and immunity
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in the electromagnetic environment given below. The user of the device should ensure that it is used in such an environment.
- This device is intended for operation in an electromagnetic environment in which the radiated high frequency disturbance variabl...
- Remarks for HF-emission and immunity
- Index
56
2900H EN 20071108Advanced operation (Key-operator mode)
DRYSTAR 5500/5503 REFERENCE MANUAL
Overview of Key-operator functions
The Key-operator menus make it possible to use the Drystar 5500 advanced
functions. If not specified otherwise, the functions are described in detail in
this chapter.
For general information on the functions of the Drystar 5500 keys, refer to
‘The local user interface’ on page 27.
Overview
The Drystar 5500 features the following functions on the main menu level of
the Key-operator mode:
Refer to the indicated page for an explanation of the function and the
appropriate procedures.
Menu item Function Page
Stop printing To halt the printing procedure 59
Show settings To consult the current settings of the printer. 60
Change settings To change the current settings of the printer. 69
Print Image
To print one of the standard Drystar 5500 test
images. To load and print images from a floppy
disk.
100
Save configuration To make a back-up of the printer settings. 105
Restore
configuration
To restore the back-up of the printer settings. 107
Calibration To calibrate the printer. 111
Installation
To install the software with the installation
wizard.
121
Quality control
To control with a daily procedure the image
quality respectively of general radiography &
mammography (optional) applications.
141
&
153